We are providing Hybrid Poplar Plants in balrampur, for more help call: +91-9651263333, 9453278562 or mail us on: info@indiaplantation.com

Hybrid Poplar Plants is one of the fast growing industrial woods which can be grown as a mono crop as well as in association with agricultural crops. Its wood being light, homogenous and odourless is suitable for match splints, plywood, ply board, packing cases, sports goods, artificial limbs, furniture, pulp paper, wood wool, light constructional timber, pencils, furniture etc. Poplar being a deciduous species adds tremendous amount of leaf litter to the soil and is considered to be one of the best species for India Plantation. The species has performed well in India especially above latitude 28° North.Poplar grows well in the subtropical climate where the temperature extremes are not too severe and springs are free from late frost. It requires loam to sandy loam, deep fertile, well drained soils with assured irrigation. It does not perform well on saline, alkaline ( pH > 8.0 ), dry sandy soils, water logged areas and hard clays.
A light preparatory irrigation is given so that the soil has proper moisture at the time of ploughing. The field has to be leveled after ploughing. One deep ploughing upto 25-30 cm depth is desirable. This is followed by deep harrowing once in either direction and then planking with heavy roller or ‘Sohaga’. Phosphatic and Potassium fertilizers should be added at this point followed by a round of harrowing. Each block of nursery should be divided in standard sized beds, which should be 5-6 m in width and 15 m in length perpendicular to the irrigation channels, so that one channel irrigates a row of beds on either side of the channel. As far as possible, the main irrigation channel should run in North-South direction and side irrigation channels which irrigate individual beds should be in East-West direction. One meter wide inspection path should be retained in between two adjoining rows of beds.
Cuttings made from one year old wood of the main stem of young healthy and vigorous plants give better results. Cuttings obtained from the middle of the main shoot with diameter between 1-3 cms perform better. Plants must be given a clean cut and splitting must be avoided. The cutting should be prepared much in advance. Each cutting should be at least 1 cm thick and it is not desirable to have more than 2.5 cms thick set of cuttings. The length of the cuttings should be about 20 cms and as far as possible the upper cut of the cutting should be slightly above the bud. After preparation of the cuttings, these should be covered with wet gunny bags to avoid desiccation. Before planting, the cuttings should be soaked in fresh water (not stagnant) for 24 hours.

India Plantation Provides all types plants in India and Abroad

Serving Greenery Globally

Hybrid Poplar Plants in Balrampur

India Plantation Provides all types plants in India and Abroad is the best way to find & discover great local businesses